Prosoft PLC Interface Module MVI56E-MCM
The MVI56E Communication Module allows for Modbus Master and/or Slave connectivity from Rockwell Automation® ControlLogix® processors to Modbus RTU/ASCII devices. Each MVI56E port can be configured as a Master or Slave.
The MVI56E-MCM and MVI56E-MCMXT act as input/output modules on the ControlLogix backplane, making Modbus data appear as I/O data to the processor. Two independently configurable serial ports can operate on the same or different Modbus networks. The MVI56E-MCM is designed for standard process applications and the MVI56E-MCMXT is designed for the Logix-XT™ control platform, allowing it to operate in extreme environments. It can tolerate higher operating temperatures, and has conformal coating to protect it from harsh or caustic conditions.
Description
Prosoft PLC Interface Module MVI56E-MCM
- Extended Product Type : ASCII
-
- Product ID: MVI56E-MCM
-
- Prosoft Type Designation : ASCII
Features and Benefits
Backward Compatibility
- All MVI56E products are backward-compatible with earlier MVI56 modules allowing direct replacement without the need to change existing controller program.
10,000 Word Database
- Allows you to gather more data from your devices, which improves operational performance
- Enjoy Enhanced features and flexibility without incurring expensive reprogramming costs
Add-On Instruction
- Module configuration stored within the RSLogix™ 5000 project (ACD file)
- No additional programming or configuration software is required
- Add-On Instruction for RSLogix 5000 version 16 or higher cuts development time and costs
CIPconnect® Enabled
- Facilitates remote user access across the ControlLogix backplane through Rockwell Automation’s 1756-ENBT module
- Configure, diagnose, and analyze process data and communications status
- Bridge through multiple ENBT/CNBT links to connect to MVI56E-MCMs installed in remote chassis for configuration and diagnostics
Specification
- Backward-compatible with previous MVI56-MCM version
- Single Slot – 1756 ControlLogix® backplane compatible
- 10/100 MB Ethernet port for network configuration and diagnostics with Auto Cable Crossover Detection
- User-definable module data memory mapping of up to 10,000 16-bit registers
- 4-character, scrolling, alphanumeric LED display of status and diagnostic data in plain English
- ProSoft Discovery Service (PDS) software finds the module on the network and assigns a temporary IP address to facilitate module access
- Supports RIUP (Remove and Insert Under Power)
Brand
Prosoft
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.